It is well known that Cisco CCNA certification training is experiencing a great demand in IT industry area. In recent years, the CCNA certification has become a global standard for many successful IT companies.

Pass4Sure dumps for CCNA are very good for preparing for the CCNA exam. These dumps provide with simulations and questions that are similar to the real CCNA exams. As you have to buy Pass4Sure dumps in order to get benefit from them, I have been looking for places where I can download the latest Pass4Sure CCNA 640-802 dumps for free. The latest release seems to be version 3.22 which you can download below:

(more…)

Cisco Certified Network Professional (CCNP®) validates knowledge and skills required to install, configure and troubleshoot converged local and wide area networks with 100 to 500 or more nodes. With a CCNP certification, a network professional demonstrates the knowledge and skills required to manage the routers and switches that form the network core, as well as edge applications that integrate voice, wireless, and security into the network. The CCNP curriculum includes building scalable Cisco networks, Cisco multilayer switched networks, securing converged wide area networks, and optimizing converged networks. (source:www.cisco.com)

(more…)

Cisco Certified Network Associate (CCNA®) validates the ability to install, configure, operate, and troubleshoot medium-size route and switched networks, including implementation and verification of connections to remote sites in a WAN. CCNA curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and performance-based skills. This new curriculum also includes (but is not limited to) the use of these protocols: IP, Enhanced Interior Gateway Routing Protocol (EIGRP), Serial Line Interface Protocol Frame Relay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, access control lists (ACLs). (Source:www.cisco.com)

Looking for latest CCNA dumps?? We have a source that gives us latest Pass4sure dumps as they are updated. So, I will update this post regularly if I find any new version of CCNA dumps available. I hope you have studied alot and now you are planning to give your exam. Since the latest Q/A are important as they come frequently, so keep yourself updated by visiting us regularly. From my experience 99% of the questions come from P4S. Therefore keep your focus on these dumps and I am sure you will be able to pass.You can download the dumps in 2 parts as follows:

(more…)

 

When a router advertises a default route to another router, it thinks that it has route to all the networks, that’s why it’s summarizing all the routes as one default route. Considering this, there is no need for the default route installed on it since it already has an individual route to every network (according to router thinking). So, it installs a route with a default route directing to NULL interface.

Cause Analysis

Routing table of Corp Router showed RIP entry instead of EIGRP.

Network Diagram

Handaling Process &  Solution

For resolving this problem I undertook the following steps:

 

1)    After applying redistribution on R3, I checked that the router 871W and hostd were able to see all the routes on the other side of R3 as RIP routes.     That was normal.

2)    Then I checked Corp Router and found out that Corp showed the route 10.1.12.0 as a RIP Entry. Corp Router was basically running both RIP and EIGRP. Static routes were also installed in Corp with AD of 150.

3)     I stopped RIP on Corp, and checked again. This time a static route took the place of RIP Entry for 10.1.12.0 network.

      4)   I checked the topology table of EIGRP and found the following error:

 

 

The route to 10.1.12.0 showed “FD is Inaccessible” which meant that the EIGRP route in the topology table for the network 10.1.12.0 was not being used for the routing table.

      5) After that I removed static entry as well. EIGRP route was successfully added to the routing table with AD of 170 as shown below

 

         

     6) The route from redistribution is considered as an external route in EIGRP. That’s why we saw RIP and static route in the routing table instead of   

          EIGRP.