While upgrading my IOS, I was getting the error message that there is not enough space available for the new IOS. I was issuing the following command:

Certhacker#copy tftp flash:
Address or name of remote host [192.168.1.1]?
Source filename [c2600-i-mz.121.T.bin]? c2600-i-mz.121-1.T.bin
Destination filename [c2600-i-mz.121-1.T.bin]?
Loading c2600-i-mz.121-1.T.bin from 192.168.1.1 (via Serial0/0): !
%Error copying tftp://192.168.1.1/c2600-i-mz.121-1.T.bin (Not enough space
on device)
Certhacker#

(more…)

set router modes for cisco router,enable mode,exec,config mode. pass4sure help you pass any IT exam!

Cisco Telepresence Magic. Interesting video..

As the title suggests, I want to have a limited access to my router through telnet. I want only specific networks to be able to telnet my router. All others should be blocked from telnetting the router.

So let’s start:

Enter global config mode

Certhacker#configure terminal
Enter configuration lines, one per line. End with CNTL/Z
Certhacker(config)#

Create Access list to permit a network

(more…)

Hostname is the name of the router. It’s up to us what we name it. It’s like giving a name to our own systems. If we are using a command line interface to access the router or switch, then we can see the current name of the device before the prompt.

(more…)

Dynamips is a Cisco router emulator written by Christophe Fillot. It emulates 1700, 2600, 3600, 3700, and 7200 hardware platforms, and runs standard IOS images. In Chris’ own words:

This kind of emulator would be useful to:

· Be used as a training platform, with software used in real world. It would allow people to become more familiar with Cisco devices, Cisco being the world leader in networking technologies ;

· Test and experiment features of Cisco IOS ;

· Check quickly configurations to be deployed later on real routers.

(more…)

Cisco: The Complete Reference is a lofty title for a book, and one that you could take
in a multitude of different directions. Some think that a book with this title should be
the “end all and be all” of Cisco books, including every possible Cisco technology and
the most obscure details of those technologies. Unfortunately, that book would
consist of over 50,000 pages, and it would be obsolete by the time you got it. (Cisco
has been trying for years to write that book; it’s called the Cisco web site, and it’s still
not complete.)
(more…)

Here are some of the most commonly used abbreviations you should know in CCNA and in common. Just bookmark this page in case you need it again:

*(CSMA/CD) carrier sense multiple access collision detect
*(OUI) organizational unique identifier
*(GBIC) gigabit interface converter
*(DTE) data terminal equipment
*(DCE) data communications equipment
*(NIC) network interface card
*(NOS) network operating system
*(VoIP) voice over IP
*(QoS) quality of service

(more…)

Understanding How InterVLAN Routing Works

Network devices in different VLANs cannot communicate with one another without a router to route traffic between the VLANs. In most network environments, VLANs are associated with individual networks or subnetworks.

(more…)

The 640-802 Cisco Certified Network Associate (CCNA) is the composite exam associated with the Cisco Certified Network Associate certification. Candidates can prepare for this exam by taking the Interconnecting Cisco Networking Devices Part 1 (ICND1) v1.0 and the Interconnecting Cisco Networking Devices Part 2 (ICND2) v1.0 courses.
The 640-802 certification exam is your first step into the Hall of CISCO, which is also a must for taking another three CCNA certifications (Security, Voice, Wireless) and the Professional Certification (CCNP, CCDP, CCSP, CCDP, CCIP).

(more…)